Click on image to zoom

Rectangular stainless steel drying rack with numerous hanging clips, shown from a low-angle perspective on white.

A bunch of green sage leaves hanging from a metal spring-loaded clip for drying.

Close-up of a stainless steel drying rack with several metal clips hanging from a wire frame.

Stack!t stainless steel drying rack box showing 28 clips for vertical herb drying.

STACK!T Hanging Dry Rack w/28 Clips

Name: STACK!T Hanging Dry Rack w/28 Clips
Brand: Grow!T
SKU: DR28HANG
Price: 26.95 USD
Availability: InStock
Rating: 5.0 (21 reviews)

Grow!T

Price:

$26.95

Contact us about commercial pricing

Quantity:

Free shipping $49+ on most items

Financing
available here

Discreet packaging

Have a question?
716-217-0353

Twenty-eight clips carry each branch by the stem, so no face of the bud rests on anything

Hydrofarm rates each stainless clip at 0.8 lb and the whole rack at 22.4 lb, so the thing to plan around is branch weight rather than plant count. The outer frame is 13.5 by 19.75 inches and drops onto a lockable hook, which means this takes a column of vertical space instead of a shelf. Frame, clips and hook are all stainless steel.

Free shipping over $49

30-day returns on all orders

Serving growers since 2006

Mesh shelves and string lines vs clip drying

What changes when the stem carries the weight

A mesh tier rack or a string line	This clip rack
Buds lie on the shelf for days and dry with the contact face pressed flat.	Each branch hangs by its stem, so nothing presses against the flower at any point.
Loaded tiers sit above and below each other, and the middle of the stack gets the stillest air.	Every clip hangs in the same open plane, so no branch is shaded by the one above it.
Neither a net nor a line comes with a published load rating, so how much it will take is a guess.	Hydrofarm publishes a per clip figure and a whole rack figure, so the load can be planned before you cut.
A 24 inch net needs a two foot circle of clear space and swings into the tent walls when you reach in.	The frame is narrower than that circle and hangs flat, so it sits against one wall or over a tray.
A full net has to be unstacked tier by tier to reach the bottom, and every branch on a line is tied by hand.	Clips release one at a time, so the small branches come off while the thick ones keep drying.
Polyester mesh holds residue, has to be hand washed, and has to be fully dry before it goes back in the bag.	Stainless wipes down and goes straight back on the hook.

Gallery

The rack, a loaded clip and the box it ships in

Before you order

Six things that decide whether this rack suits your harvest

0.8 lb per clip

Wet branches hit the rating early

A freshly cut branch carries most of its weight in water. Hang the heavy colas on their own clips and save the doubled-up loads for the small stuff.

2.3 in jaw

Cut the branch with bare stem on top

The clip grips along 2.3 inches of stem. Leave that much clean stem above the top bud and the jaws never have to close on flower.

One version, nothing to configure

There is a single build of this rack at one price. No tier counts, no diameters and no left or right hand option to get wrong at checkout.

The hanging hook locks

It will not walk along a tent crossbar or jump off a ratchet hanger while you load one end of the frame before the other.

13.5 x 19.75 in

Height is the real constraint

The footprint fits almost any tent. What decides it is branch length plus the hook plus clearance off the floor, so measure your longest branch.

Flat in, flat away

It arrives in a 20 by 14 by 2.4 inch package at 2.05 lb, and it stores in that same slot behind a shelf between harvests.

Specifications

Published figures, straight from Hydrofarm

Clips28 stainless steel

Rated per clip0.8 lb

Rated whole rack22.4 lb

Clip length2.3 in

Outer frame13.5 in x 19.75 in

ConstructionStainless frame, clips and lockable hook

Packed size and weight20 in x 14 in x 2.4 in, 2.05 lb

SKU and UPCDR28HANG, 638104020947

How it works

Four steps from cut plant to loaded rack

1

Hang it empty first

Lock the hook over a tent crossbar, a ratchet hanger or a closet rod, then confirm the rack swings free of the walls before anything goes on it.

2

Decide how much leaf stays on

Leaves left on the branch slow the dry down, stripped branches speed it up. Either way, cut so the top of each stem is bare where the clip will close.

3

Load outward, leave gaps

Fill from the middle out and skip clips where branches would touch. Two branches pressed together trap damp air between them and that is where mold starts.

4

Pull them as they finish

Thin branches are done days before thick colas, so take each one off when its small stems snap instead of bend, and move it straight into a curing container.

What you get

In the box, and what growers put next to it

What ships

One STACK!T hanging dry rack: the stainless frame, 28 stainless clips and the lockable hanging hook, all one assembly
Rack only. No ratchet hangers, straps, hygrometer or curing containers are included
One size, one finish, one price. There is nothing to select on this page
Arrives flat in a 20 by 14 by 2.4 inch package weighing 2.05 lb
Ships from our Buffalo, NY warehouse in a plain box, most orders landing in 3 to 5 business days

What growers add to it

Item	From	What it covers
Herb Drying Rack, 2, 4 or 6 tier	$14.95	Buds already cut off the stem, and overflow past 28 clips
Curved Tip Titanium Trimming Scissors	$6.95	Cutting branches down to clip length
LED Magnifying Loupe, 30x and 60x	$9.95	Calling the harvest window before you cut
Grove Bags with TerpLoc, Windowed Pouches	$0.40	The cure once branches come off the rack
Boveda 62% Packs, 8 g, 10 pack	$17.81	Holding humidity steady in jars or containers

Buying tip: at $26.95 this rack sits $22.05 under the free shipping line. Adding the 6 tier mesh rack at $24.95 brings the order to $51.90 and clears it, which is also the pairing that covers both whole branches and loose buds in one harvest.

FAQ

Questions growers ask before buying a clip rack

Can I hang a whole plant on it?

No. Each clip is a 2.3 inch jaw rated at 0.8 lb, which is a branch, not a plant. Cut the plant down into individual branches first and spread them across the clips. A whole plant on one clip is past the rating and will slip at the worst moment.

What do I hang the rack itself from?

The lockable hook takes a tent crossbar, a ratchet hanger or a closet rod. The number that matters is not the 2.05 lb rack, it is the 22.4 lb it can be carrying when every clip is full. Check what your tent poles are rated for before you fill it, especially on lightweight frames.

Will it fit in a 2x2 or a 4x4 tent?

The 13.5 by 19.75 inch frame fits inside a 2x2 footprint with room to reach around it. Height is the question to answer: add your longest branch to the hook and the clearance you want off the floor, and compare that against the space under your light. Growers running short tents usually cut branches shorter rather than skip the rack.

Should I buy this or the mesh tier rack?

It depends on when you trim. If you hang whole branches and trim dry, this rack is the better tool, because the bud keeps its shape all the way through. If you trim wet and dry loose buds, they have nothing to hang by and belong on the mesh tier rack instead. Plenty of growers keep both and use the mesh for the popcorn off the bottom of the plant.

Is this the same as the other STACK!T racks I have seen?

No. STACK!T makes several drying products, including collapsible mesh racks and zippered flip racks in two and three foot sizes. This page is the 28 clip stainless hanging rack, SKU DR28HANG, and it is the one we stock. If you are cross shopping and want to be certain, match the SKU rather than the name.

Does it work for herbs other than flowers?

Yes, and one of the photos above shows exactly that, a bunch of sage held in a single clip. Anything that can be bundled and gripped by a stem works: basil, oregano, mint, chilies, flowers for drying. The clip does not care what is on the other end of the stem.

What if my order shows up damaged, or I change my mind?

If you receive a defective or damaged unit, email us a photo at help@happyhydro.com and we'll take care of you. For change-of-mind returns, we accept returns within 30 days for most items in new, resalable condition. If you're not sure whether this product is right for your setup, call us first at 716-217-0353. We'd rather answer your questions before you order.

Why buy from Happy Hydro?

Happy Hydro has been selling growing equipment since 2006. We've carried STACK!T for years because the systems work great and customers who buy them leave happy. Have questions before you order? Call 716-217-0353 or email help@happyhydro.com. We're easy to reach and happy to help!

Questions? We're easy to reach.

Happy Hydro has been serving growers since 2006. Call or email us before you order, after you order, or any time something comes up. When you're happy, we're happy.

716-217-0353 help@happyhydro.com

Why Happy Hydro

Why Buy From Happy Hydro

Happy Hydro began as a pipe dream in a garage and has grown into something built almost entirely on word of mouth and repeat customers. Rather than focusing on raising margins and obsessing over profits, we've always believed that the right combination of competitive prices, superior products, and world-class customer service speaks for itself. Our philosophy will never change: when you're happy, we're happy.

Our commitment

What you can expect from Happy Hydro

Real People, Real Growers

Our grower support team isn't a call center. They know the products because they're passionate about growing. Reach us Monday-Friday, 10 am-4 pm EST at 716-217-0353 or help@happyhydro.com, before you order or after.

Hand-Picked by Growers, for Growers

Every brand we carry was chosen by our founders because it performs. We only stock premium brands we believe in, and every item is inspected before it leaves our warehouse.

Fair Prices and Free Shipping

We work hard to keep our prices as low as manufacturers allow, and we include free shipping on orders over $49 so there are no surprises at checkout. Find a lower price anywhere and we'll match it.

Authorized for Every Brand We Carry

We're an authorized dealer for every manufacturer on our site. That means you get the full manufacturer's warranty on every purchase. No grey market, no expired stock.

30-Day Returns on Most Orders

Hard to commit to a product you haven't tried. Return most items within 30 days in original condition and we'll take care of it. Read the full policy.

Secure Shopping, Private Data

Every transaction is SSL encrypted. We don't store payment information and we will never sell your data to anyone, ever.

Volume and Commercial Pricing

If you're a commercial grower or putting together a large order, reach out before you buy. We have pricing available that we can't advertise publicly. Call 716-217-0353 or email help@happyhydro.com and we'll take care of you.

Questions? We're easy to reach.
Happy Hydro has been serving growers since 2006. Call or email our grower support team Monday-Friday, 10 am-4 pm EST, or email us anytime.